TableGrid lines projecting when exported

General TRichView support forum. Please post your questions here
Post Reply
Greg Stevenson
Posts: 6
Joined: Mon Oct 13, 2008 4:50 pm

TableGrid lines projecting when exported

Post by Greg Stevenson »

Attach is a png of a simple 2x2 grid and the RTF output of the same using SaveRTF. The displayed grid (png) looks fine, but when the exported RTF is rendered in Word or something similar, the grid lines seem to project. Is there anyway to correct this? Using latest TRichView/ScaleRichView (17.6.2_8.5.1) but issue was initially reported to us in earlier version from 2015.
Attachments
table2.rtf
(5.63 KiB) Downloaded 1061 times
Table2.png
Table2.png (911 Bytes) Viewed 12863 times
Sergey Tkachenko
Site Admin
Posts: 17253
Joined: Sat Aug 27, 2005 10:28 am
Contact:

Re: TableGrid lines projecting when exported

Post by Sergey Tkachenko »

Sorry, I am not sure that I understand the problem.
Please attach this document in RVF format.
Greg Stevenson
Posts: 6
Joined: Mon Oct 13, 2008 4:50 pm

Re: TableGrid lines projecting when exported

Post by Greg Stevenson »

Sorry it took so long to get back to you. Grid.rvf is a simple 2x2 grid showing the issue. It and the Grid.rtf file were saved using the TCustomRichView.SaveRVF/RTF functions from within our program. Grid2.rtf was generated but opening Grid.rvf using "..\Demos\Delphi\Editors\Editor 1\RVEditDemo.exe" and then saving as RTF. The grid looks find when rendered on screen. However, if saved to RTF or "printed" to PDF the grid lines project beyond the boundaries of the table as shown here
WordGrid.PNG
WordGrid.PNG (4.61 KiB) Viewed 12453 times
and here
WordGrid2.PNG
WordGrid2.PNG (4.29 KiB) Viewed 12453 times
. The snapshots were taken in Word after opening Grid2.rtf.
Attachments
Grid2.rtf
(3.61 KiB) Downloaded 1025 times
Grid.rvf
(623 Bytes) Downloaded 1043 times
Grid.rtf
(5.58 KiB) Downloaded 1007 times
Post Reply